ABB FV4000 Operating Instruction page 74

Parameterization
Buttons Menu item
„Data" Hardware
„Step" Config.
„Data" Min.
„Step" Q_Alarm
„Data" Max.
„Step" Q_Alarm
„Data" Min.
„Step" T_Alarm
„Data" Max.
„Step" T_Alarm
74
Buttons Set parameter
„Enter"
I/HART
s
„Enter" +
10.000
%_
„Enter"
„Enter" +
80.000
%_
„Enter"
„Enter" +
50
C_
„Enter"
„Enter" +
180.000
C_
„Enter"
Configurable
Buttons Comments
parameters
„Enter" I/HART Configuration of the switching output: Current, HART
protocol
s
I/HART/ Current, HART protocol
„Step"
Puls_Bin_ Switching output: Pulse
I/HART/ Current, HART protocol
„Step"
Q_Alarm_ Switching output: "Flow" max./min. alarm with alarm
closed.
I/HART/ Current, HART protocol
„Step"
T_Alarm_ Switching output: "Temperature" max./min. alarm with
alarm closed.
I/HART/ Current, HART protocol
„Step"
S_Alarm_ Switching output: System alarm with alarm closed.
0 Selection: 0 ... 100 % of Qmax (0 % = off)
„Enter"
%_ Min. "flow" alarm
„Enter" 0 Selection: 0 ... 100 % of Qmax (100 % = off)
%_ Max. "flow" alarm
„Enter" 0 Selection: -60 ... 410 C (-60 C = off)
C_ Min. "temperature" alarm
„Enter" 0 Selection: -60 ... 410 C (410 C = off)
C_ Max. "temperature" alarm
FV4000 / FS4000
Important
The "Min. Q_Alarm" and "Max. Q_Alarm"
menu items are only displayed if the
"I/HART/Q_Alarm" parameter is selected.
Important
The "Min. Q_Alarm" and "Max. Q_Alarm"
menu items are only displayed if the
"I/HART/T_Alarm" parameter is selected.
D184B097U02