A.2.1.2 Executing M Functions - Siemens SINUMERIK 808D User Manual
Programming and operating manual (milling)
Hide thumbs
Also See for SINUMERIK 808D:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
A.2.1.2
Executing M functions
N o te
Before executing M functions, make sure all the axes are in safe positions.
Op e rating sequence
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
4.
Press this key on the MCP to stop the spindle rotation.
5.
Press this key on the MCP to rotate the spindle clockwise.
10.
Use this softkey to return to the screen of the machining operating area.
1.
Select the machining operating area.
2.
Switch to "JOG" mode.
3.
Open the "T, S, M" window.
4.
Press this key to move the cursor to the input field for M functions, and enter the desired
value, for example, "8".
5.
Press this key on the MCP to activate the coolant function. Now you can see the corre-
sponding status indicator is on, which indicates the coolant supply is switched on.
6.
Press this key on the MCP to stop the coolant function.
7.
Use this softkey to return to the main screen of the machining operating area.
289
Advertisement
Table of Contents
