Siemens SINUMERIK 808D User Manual page 322
Programming and operating manual (milling)
Hide thumbs
Also See for SINUMERIK 808D:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Commissioning manual (508 pages)
Table of Contents
Advertisement
322
7.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
Direction of rotation: counter-clockwise
•
R: 9.5
•
I: 0 abs.
•
RND: 2
•
8.
Press this softkey to confirm.
9.
Press this softkey to select a contour element of straight line in any direction.
10.
Enter the parameters for this element and press this softkey to confirm.
α1: -30 °
•
11.
Press this softkey to select a contour element of circular arc.
12.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
Direction of rotation: clockwise
•
R: 2
•
J: 4.65 abs.
•
13.
Press this softkey to confirm.
14.
Press this softkey to select a contour element of circular arc.
15.
Enter the parameters for this element and press these softkeys to select the desired contour
characteristics.
Direction of rotation: counter-clockwise
•
R: 3.2
•
I: 11.5 abs.
•
J: 0 abs.
•
16.
Press this softkey to confirm.
17.
Press this softkey to select a contour element of circular arc.
18.
Enter the parameters for this element and press these softkeys to select the desired contour
characteristics.
Direction of rotation: clockwise
•
R: 2
•
J: -4.65 abs.
•
19.
Press this softkey to confirm.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
Advertisement
Table of Contents
