Siemens SINUMERIK 808D User Manual page 69

C reating and connecting a network drive
Proceed as follows to create and connect a network drive:
N o te
After you properly configure all the settings for the direct connection between the control system and the network drive, if the
network drive connection is still invalid, contact your Windows system administrator for possible problems with your
operating system configuration.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
1. Share a directory on your local disk on your computer.
2. Select the program management operating area.
3. Press this softkey to go to the network drive directory.
4. Press this softkey to go to the window for configuring the network drives.
5. Press this key to select a drive identifier: N1, N2, or N3.
6. Move the cursor to the following input fields:
①
: Enter the user name of your Windows account
②
: Enter the logon password (case sensitive) of your Windows account
③
: Enter the IP address of the server and the share name of the shared directory on your
computer. Example: //140.231.196.90/808D
7. Press this softkey to confirm and the configured network drive appears on the screen as
follows. The drive icon is yellow if the network drive is connected successfully; otherwise,
the icon is gray.
You can delete a selected network drive using this softkey.
69