Siemens SINUMERIK 808D User Manual page 285

①
Sets the NC, PLC and HMI start up modes
② Sets the system machine data
③ Configures the connected drives and motors (PPU16x.3 and PPU15x.3 only)
④ Provides PLC commissioning and diagnostics
⑤ Sets the system date and time and adjusts the brightness of the screen
⑥
Backs up and restores system data
⑦
Creates and restores startup archives, data archive
⑧ Performs the axis optimization (PPU16x.3 and PPU15x.3 only)
⑨ Enters the corresponding password (manufacturer password, and end user password) for different access levels
⑩
Changes the password as per the corresponding access levels
⑪
Deletes the current password
⑫
Selects the user interface language. Note that the HMI is automatically restarted when a new language is selected.
⑬
Switches to the ISO programming mode
⑭ Saves the contents of the volatile memory into a non-volatile memory area
An extended horizontal softkey bar can be accessed via this key on the PPU. Two extended horizontal
softkeys are provided:
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
Views the service information
Defines the maintenance planner
285