Siemens SINUMERIK 808D User Manual page 19

Se tting the password
+
C h anging/deleting the password
N o te
To avoid unauthorized access to the controller, you must change the Siemens default passwords to your own ones.
+
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
1. Select the system data operating area.
2. Open the following password setting window and then enter the desired password (default
end-user password: CUSTOMER):
3. Confirm the input.
1. Select the system data operating area.
2. If you desire to change the existing password, press this softkey to open the following win-
dow and enter the new password:
If you desire to delete the existing password, proceed directly to Step 6.
3. Confirm the new password.
4. Enter the new password again in the following window:
5. Press this softkey to confirm the new password.
6. If you desire to delete the existing password, directly press this softkey.
19