⑥
Opens the program simulation window to check the programming results before machining
⑦
Recompiles the current cycle or contour selected with cursor by reopening the previous programming window
⑧
Executes the current program
⑨
Automatically assigns block numbers (Nxx) to all blocks
⑩
Opens the block search dialog box
⑪
Inserts a marker at the cursor position for copying/deleting the program blocks selected with the cursor
⑫
Copies the selected program blocks to the buffer memory
⑬
Pastes the copied program blocks at the current cursor position
A.1.3
Offset operating area
When working with the CNC, you need to set up the machine and the tools, etc. as follows:
● Create the tools and cutting edges.
● Enter/modify the tool and work offsets.
● Enter the setting data.
So ftkey functions
Pressing this key on the PPU allows you to open the following window:
So ftkey
Fu n ction
①
Displays and modifies the tool offsets
②
Displays and modifies the tool wear data
③
Displays and modifies the workpiece offsets
④
Displays and modifies the R variables
⑤
Configures and displays lists of setting data
280
Se e also
"Creating a tool (Page 21)"
•
"Creating/changing a cutting edge (Page 22)"
•
"Entering the tool wear offsets (Page 49)"
"Entering/modifying workpiece offsets (Page 59)"
"Setting R parameters (Page 63)"
"Entering/modifying the setting data (Page 60)"
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017