Configuring The Firewall - Siemens SINUMERIK 808D User Manual

10.10.3

Configuring the firewall

C o nfiguring the firewall
Secure access and communication is achieved through the security function of the integrated firewall. You can open the
window for firewall configuration through the following operations:
+ →
Configurable ports are listed in the following window:
The ports are disabled by default and can be enabled when necessary. To change the port status, select the relevant port
using the cursor keys and press either of the following keys to enable or disable the port:
/
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
3. Select the desired network drive (which includes the part program to be transferred) and
press this key to open it.
4. Select the program file you desire to transfer.
5. Press this softkey to copy the file to the buffer memory on the control system.
6. Enter the program directory.
7. Press this softkey to paste the copied file into the program directory.
→ → →
71