Setting R Parameters - Siemens SINUMERIK 808D User Manual

10.6

Setting R parameters

Fu n ctionality
The "R variables" start screen lists the R parameters that exist within the control system. You can set or query these global
parameters in any program as required.
Op e rating sequence
For more information about R parameters, see Section "Arithmetic parameter R (Page 126)".
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
4. Select a group of setting data you desire to modify.
5. Press these softkeys to search for your desired setting data with the data number/name.
Alternatively, you can position the cursor on the input field to be modified and enter the
desired value.
To switch to the desired axis when modifying the axis-specific setting data, press the corre-
sponding softkey:
6. Press this key or move the cursor to confirm your entries.
1. Select the offset operating area.
2. Open the list of R parameters.
3. Press the cursor keys to navigate in the list, and enter the values in the input fields to be
modified.
N o te:
You can search for your desired R variable with this softkey. By default, the function
searches the R number.
You can press this softkey to activate the option of searching by R name. Define the R
name as desired, if necessary.
4. Press this key or move the cursor to confirm your entries.
63