15.
16.
17.
18.
19.
20.
21.
Now you can see the programmed contour in the graphics window:
320
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
Direction of rotation: counter-clockwise
•
R: 64
•
X: -6 abs.
•
I: 0 abs.
•
RND: 5
•
Press this softkey to confirm.
Press this softkey to select a contour element of straight vertical line.
Enter the parameters for this element and press this softkey to confirm.
α1:90 °
•
RND: 5
•
Press this softkey to select a contour element of circular arc.
Enter the parameters for this element and press this softkey to select the desired contour
characteristics.
Direction of rotation: clockwise
•
R: 25
•
X: 0 abs.
•
Y: 0 abs.
•
I: 0 abs.
•
Press this softkey to confirm.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017