C o ntour symbol colors
The meaning of the symbol colors in the contour chain on the left of the main screen is as follows:
Ico n
Selected
Not selected
A.8.3
Parameters for contour elements
Pa rameters for p rogramming straight lines
①
Absolute (abs)/incremental (inc) end position in X or Y direction
②
Transition element to the next contour is a chamfer (CHR) or a radius (RND). CHR=0 or RND=0 means no transition
element.
③
Input field for supplementary comments, such as F1000 feedrate values, H or M functions. If comments are entered as
text, they must always be started with a semicolon ";".
④
You can specify a side-based parallel contour allowance. It is displayed as an allowance in the graphics window.
⑤
The contour chain which displays the start point and programmed contour elements. The current position in the chain
is color-highlighted.
⑥
The graphics window which displays the progress of the contour as you configure the parameters for the contour ele-
ments.
Pa rameter
D e scription
L
Length of the straight line
α1
Pitch angle with reference to Y axis
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017
Si gnificance
Symbol color black on a red background → Element is defined geometrically
Symbol color black on a light yellow background → Element is not defined geometrically
Symbol color black on a gray background → Element is defined geometrically
Symbol color white on a gray background → Element is not defined geometrically
The following additional parameters are displayed after you press this softkey:
311