Siemens SINUMERIK 808D User Manual page 62

Se tting the working area limitation
Op e rating sequence
1.
2.
3.
4.
5.
6.
Pa rameters in the window for working area limitation
① Displays the axes that exist in the machine coordinate system (MCS), workpiece coordinate system (WCS), or
relative coordinate system (REL)
② ④
The minimum/maximum traversing distance specified for the axes
/
③ ⑤
Activates or deactivates the entered minimum/maximum value
/
⑥ Unit for the traversing distance
Mo difying miscellaneous setting data
Op e rating sequence
1.
+
2.
3.
62
Select the offset operating area.
Open the setting data window.
Open the working area limitation window.
Position the cursor on the input field to be modified and enter the required value.
Position the cursor on the checkbox for value activation located after the input field.
Press this key to activate or deactivate your input in Step 4.
Select the system data operating area.
Open the window for machine data.
Open the window for the expert list.
Programming and Operating Manual (Milling)
6FC5398-4DP10-0BA6, 09/2017