Usb Hid Via Bt Cradle - CipherLab 2560 User Manual

2.6 USB HID VIA BT CRADLE

For USB HID, use the USB cable to connect the scanner via BT Cradle to the USB port of
PC and connect the power supply cord. Run any text editor on your computer, and the
scanned data will be transmitted to the computer.
Warning: When the cradle is solely on USB power, the current may be insufficient for
it to function normally. You must connect the power supply cord.
HID Settings
Keyboard Type
Digits Layout
Capital Lock Type
Capital Lock State
Alphabets Transmission
Digits Transmission
Inter-Character Delay
Inter-Function Delay
Chapter 2
Defaults
PCAT (US)
Normal
Normal
Off
Case-sensitive
Alphanumeric keypad
0 (ms)
0 (ms)
Update
Selecting Output Interface
89