CipherLab 2560 User Manual page 120

2560 Series Barcode Scanner
Use random PIN
No PIN required
Note: When using BT HID, some device driver may not support pre-defined PIN code for
authentication. In this case, make sure you have the scanner set to "No PIN or use
random PIN" before pairing. While pairing, the host PIN code will be displayed on
the computer screen. Have the scanner read the setup barcode "Enter PIN Code in
Decimal" or "Enter PIN Code in Hexadecimal" to input the matching PIN code.
Refer to Disable Authentication or Use Random
108
User Guide
PIN.
Enter Setup