CipherLab 2560 User Manual page 225

Note: The output interface remains unchanged as specified in step 3 (RS-232 or USB
Virtual COM). For RS-232, the baud rate setting is still 115200 bps!
BLUETOOTH
USING
®
1) Refer to 3.2.3 Connect to Dongle
request from your computer.
2) Read the following barcodes in sequence to configure the scanner to use BT SPP as
download interface.
3) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K2560_V*.shx
DONGLE
Enter Setup
Enter Setup
for the target scanner to accept the connection
Activate BT SPP
Update
Download
User Program
STD2560_V*.shx
Update
Appendix I Firmware Upgrade
213