Laser Mode - CipherLab 2560 User Manual

2560 Series Barcode Scanner

1.6.3 LASER MODE

The scanner will start scanning once the trigger is held down.
The scanning won't stop until (1) a barcode is decoded, (2) the pre-set timeout

expires, or (3) you release the trigger.
Note: Refer to "Scanning Timeout".
1.6.4 AUTO OFF MODE
The scanner will start scanning once the trigger is pressed.
The scanning won't stop until (1) a barcode is decoded, and (2) the pre-set timeout

expires.
Note: Refer to "Scanning Timeout".
1.6.5 AUTO POWER OFF MODE
The scanner will start scanning once the trigger is pressed.
The scanning won't stop until the pre-set timeout expires, and, the pre-set timeout

period re-counts after each successful decoding.
Note: Refer to "Delay between Re-read" and "Scanning Timeout".
40
User Guide
Auto Power Off Mode
*Laser Mode
Auto Off Mode
Enter Setup