UseVariablePort<CR>
Purpose
To use variable Virtual COM port when connecting more than one cradle to PC via
USB.
Here is the setup barcode for this serial command:
Version<CR>
Purpose
To get the firmware versions.
Here is the setup barcode for this serial command:
GetID<CR>
Purpose
To get MAC ID.
Here is the setup barcode for this serial command:
Download<CR>
Purpose
To download firmware to the cradle via RS-232 or USB.
Here is the setup barcode for this serial command:
Appendix II
Host Serial Commands
UseVariablePort
Version
Download
Update
GetID
221