Inter-Function Delay - CipherLab 2560 User Manual

Chapter 2 Selecting Output Interface

2.6.4 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Inter-Function
Delay... (*0~254)
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal Value" barcode on page 227 for the desired inter-function delay
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
2.6.5 HID CHARACTER TRANSMIT MODE
By default, HID interface sends data to the host in batch. You may have the scanner read
the "By Character" barcode to process data one character at a time.
*Batch Processing
By Character
97
Update