2560 Series Barcode Scanner
6.4.2 FIELD ADJUSTMENT
You may apply equal length to all fields, if necessary. If data is found longer than
specified, it will be truncated automatically. When data is found shorter, it will add
"Space" (0x20) to field.
1) Read the barcode above to adjust field by length.
2) Read the
"Decimal
3) Read the "Validate" barcode on the same page to complete this setting.
6.4.3 TOTAL NUMBER OF FIELDS
Data can be divided into at most 6 fields; each of them is numbered from F1 to F6
accordingly. However, only F1~F5 can be configured.
The total number of fields must be specified correctly. If three fields are configured
for the editing format, the data characters after F3 will be assigned to F4
automatically. This feature is quite useful especially when data of variable lengths is
processed by editing formats.
196
User Guide
Value" barcode on page 227 for the desired field length.
*No adjustment
Set length to adjust
fields... (*0)
*One Field
Two Fields
Three Fields
Four Fields
End Programming Format