2560 Series Barcode Scanner
1.11.3 AMBIENT LIGHT
When the ambient light is too dim to activate the sensor, you may have the scanner read
the "High Sensitivity" barcode to improve performance. It will emit scan beam every 300
milliseconds when "High Sensitivity" is enabled.
Note: If the ambient light is under 100 lux, we suggest that you either add lighting or
use Continuous mode instead.
1.12 CCD SENSOR ALWAYS ACTIVE
This feature is used to keep the CCD sensor always active so that the scanner can decode
more efficiently. However, you may disable it in order to save battery power.
48
User Guide
High Sensitivity
*Normal
*Enable
Enter Setup