Scanning Timeout - CipherLab 2560 User Manual

1.7 SCANNING TIMEOUT

Specify the scanning time interval (1~254 sec.; 0= Disable) when the scan mode is set
to any of the following –
Laser mode

Auto Off mode

Auto Power Off mode

Aiming mode

1) Read the barcode above to specify the time interval before the scan engine times out.
2) Read the "Decimal
scanner to automatically shut down after idleness of 15 seconds.
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 227. For example, read "1" and "5" for the
Chapter 1 Understanding the Barcode Scanner
Scanner Time-out
after 0~254 sec.
(*10)
Update
43