Default Settings - CipherLab 2560 User Manual

2560 Series Barcode Scanner

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS
For the scanner to keep the customized settings as user defaults, you must have it read
the "Save as User Defaults" barcode. This is a normal setup barcode, and the scanner will
respond with two beeps (low-high tone).
After reading the "Update" barcode, the current settings will be saved as user

defaults.
RESTORE USER DEFAULTS
For the scanner to restore the user defaults, which you have saved earlier, you must
have it read the "Restore User Defaults" barcode. This is a normal setup barcode, and the
scanner will respond with two beeps (low-high tone).
After reading the "Update" barcode, all the parameters of the scanner will return to

their customized values.
RESTORE SYSTEM DEFAULTS
For the scanner to restore the factory defaults, you must have it read the "Restore
System Defaults" barcode. This is a normal setup barcode, and the scanner will respond
with two beeps (low-high tone). For the cradle to restore factory defaults, refer to
Cradle Setup Barcodes & Serial
After reading the "Update" barcode, all the parameters of the scanner will return to

their default values. The current connection record will be cleared as well.
Note: The system default value (if there is) for each setting is indicated by an asterisk
"*".
14
User Guide
Commands.
Save as User
Defaults
Restore User
Defaults
Restore System
Defaults
Enter Setup
BT