Table of Contents
Advertisement
1662/1664 Barcode Scanner
DEFAULT SETTINGS
SAVE USER SETTINGS AS DEFAULTS
For t he scanner t o keep t he cust om ized set t ings as user default s, you m ust read t he
" Save as User Default s" barcode. This is a norm al set up barcode, and t he scanner will
respond wit h t wo beeps ( low- high t one) .
Aft er reading t he " Updat e" barcode, t he current set t ings will be saved as user
default s.
RESTORE USER DEFAULTS
For t he scanner t o rest ore t he user default s, which you have saved earlier, you m ust
read t he " Rest ore User Default s" barcode. This is a norm al set up barcode, and t he
scanner will respond wit h t wo beeps ( low- high t one) .
Aft er reading t he " Updat e" barcode, all t he param et ers of t he scanner will ret urn t o
t heir cust om ized values.
RESTORE SYSTEM DEFAULTS
For t he scanner t o rest ore t he fact ory default s, read t he " Rest ore Syst em Default s"
barcode. This is a norm al set up barcode, and t he scanner will respond wit h t wo beeps
( low- high t one) . Aft er reading t he " Updat e" barcode, all t he param et ers of t he scanner
will ret urn t o t heir default values. The current connect ion record will be cleared as well.
Refer t o
1.18.1 Rest ore Syst em Default s
during operat ion.
For 3610 t o rest ore fact ory default s, refer t o
Not e: The syst em default value ( if t here is one) for each set t ing is indicat ed by an
ast erisk " * " .
12
User Guide
for t he key com binat ion used t o rest ore default s
3610 Set up Barcodes
Save as User
Defaults
Restore User
Defaults
Restore System
Defaults
Enter Setup
& Serial Com m ands.
Advertisement
Table of Contents
