Default Settings; Save User Settings As Defaults; Restore User Defaults; Restore System Defaults - CipherLab 1500 Series User Manual

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS

For the scanner to keep the customized settings as user defaults, you must have it read
the "Save as User Defaults" label. This is a normal label, and the scanner will respond
with two beeps (low-high tone).
After reading the "Update" label, the current settings will be saved as user defaults.

RESTORE USER DEFAULTS

For the scanner to restore the user defaults, which you have saved earlier, you must
have it read the "Restore User Defaults" label. This is a normal label, and the scanner will
respond with two beeps (low-high tone).
After reading the "Update" label, all the parameters of the scanner will return to their
customized values.

RESTORE SYSTEM DEFAULTS

For the scanner to restore the factory defaults, you must have it read the "Restore
System Defaults" label. This is a normal label, and the scanner will respond with two
beeps (low-high tone).
After reading the "Update" label, all the parameters of the scanner will return to their
default values.
Note: The system default value (if there is) for each setting is indicated by an asterisk
"*".
Save as User Default
Restore User Defaults
Restore System Defaults
Quick Start
5