錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
DEFAULT SETTINGS
SAVE USER SETTINGS AS DEFAULTS
For the scanner to keep the customized settings as user defaults, have it read the "Save
as User Defaults" barcode. This is a normal setup barcode, and the scanner will respond
with two beeps (low-high tone).
After reading the "Update" barcode, the current settings will be saved as user
defaults.
RESTORE USER DEFAULTS
For the scanner to restore the user defaults saved earlier, have it read the "Restore User
Defaults" barcode. This is a normal setup barcode, and the scanner will respond with two
beeps (low-high tone).
After reading the "Update" barcode, all the parameters of the scanner will return to
their customized values.
RESTORE SYSTEM DEFAULTS
For the scanner to restore the factory defaults, have it read the "Restore System
Defaults" barcode. This is a normal setup barcode, and the scanner will respond with two
beeps (low-high tone).
After reading the "Update" barcode, all the parameters of the scanner will return to
their default values.
Note: The system default value (if there is) for each setting is indicated by an asterisk
"*".
Save as User
Defaults
Restore User
Defaults
Restore System
Defaults
Update
7