Default Settings; Save User Settings As Defaults; Restore User Defaults; Restore System Defaults - CipherLab 1663 User Manual

1663 Barcode Scanner

DEFAULT SETTINGS

SAVE USER SETTINGS AS DEFAULTS

For the scanner to keep the customized settings as user defaults, you must read the
"Save as User Defaults" barcode. This is a normal setup barcode, and the scanner will
respond with two beeps (low-high tone).
After reading the "Update" barcode, the current settings will be saved as user
defaults.

RESTORE USER DEFAULTS

For the scanner to restore the user defaults, which you have saved earlier, you must
read the "Restore User Defaults" barcode. This is a normal setup barcode, and the
scanner will respond with two beeps (low-high tone).
After reading the "Update" barcode, all the parameters of the scanner will return to
their customized values.

RESTORE SYSTEM DEFAULTS

For the scanner to restore the factory defaults, read the "Restore System Defaults"
barcode. This is a normal setup barcode, and the scanner will respond with two beeps
(low-high tone). After reading the "Update" barcode, all the parameters of the scanner
will return to their default values. The current connection record will be cleared as well.
Refer to 1.17.1 Restore System Defaults
during operation.
For 3610 to restore factory defaults, refer to
Note: The system default value (if there is one) for each setting is indicated by an
asterisk "*".
12
User Guide
Save as User
Defaults
Restore User
Defaults
for the key combination used to restore defaults
3610 Setup Barcodes
Restore System
Defaults
& Serial Commands.
Enter Setup