Body Cut-Outs; Fuel Filler - Factory Five Racing MK4 ROADSTER Assembly Manual

At the top front of the trunk measure across and mark the top of body area.
Use the trunk latch hole for this area of the body.
Use a single piece of masking tape from the front lower oil cooler area to the bottom back of the body then cut
the cockpit area out, trunk gaps and the hood gaps.

Body Cut-outs

Fuel filler


Drill, ⅛", " drill bit, 3½" hole saw or air saw or jig saw, masking tape, scissors.
7 /
32

Fuel filler template, Aston Lemans Cap components.
374
www.factoryfive.com 508-291-3443