With the help of a friend, slide the windshield down through the slots in the body until the bottom edge is
resting on the body and mark the chassis mounting holes on the arms. If the arms are too long and prevent the
windshield from sitting down then pull them back out and trim off the excess.
Remove the windshield from the car and then remove the sidebars from the windshield.
At the marks made on the sidebar, measure and mark the center of the sidebar to give the correct angle
adjustment on the windshield. Drill the holes with a ½" bit.
Remount the sidebars on the windshield.
351
www.factoryfive.com
508-291-3443