Hood Hinge - Factory Five Racing MK4 ROADSTER Assembly Manual

Hood Hinge


" Drill bit, drill, measuring tape, rivet gun, marker,
3
/
16

Hood hinge
The hood hinge pivot mounts attach to the hood using rivets, the holes are predrilled in the hood liner but you
may need to clean them out with a
going to remove the hinge brackets prior to body painting (recommended).
" drill bit. This is the initial install so you only need a few rivets if you are
3
/
16
331
www.factoryfive.com
" hex key, ½" wrench
3
/
16
508-291-3443