Driveshaft - Factory Five Racing MK4 ROADSTER Assembly Manual

Complete kit

Hide thumbs Also See for MK4 ROADSTER:

Table of Contents

Install the bolts that hold the transmission to the mount and tighten all the hardware on the mount and a-frame.

Driveshaft

14mm wrench, thread locker

Unpack the driveshaft and slip it up into the rear of the transmission. The most room to do this is usually to

hold the shaft just above the center section and come in from the driver's side.

www.factoryfive.com

508-291-3443

Do you have a question about the MK4 ROADSTER and is the answer not in the manual?