Interior Fitment - Factory Five Racing MK4 ROADSTER Assembly Manual

Using a pair of wire cutters, cut the barrel fitting off the cable.
" hex
5
Push and twist the ball stud retainer onto the end of the cable and attach the ball stud retainer using a /
64
key.
Attach the engine end of the cable sheath to the cable mount on the engine using ⅜" and
wrenches and
7/16"
push the cable wiper onto the remaining threads.

Interior Fitment

Clip off the ball fitting on the accelerator cable.
Pass the cable through to the cockpit.
240
www.factoryfive.com 508-291-3443