Mitsubishi Q01CPU User Manual page 76

2
SYSTEM CONFIGURATION
Battery for QCPU (Q6BAT)
Q7BAT-SET
Battery holder Battery for QCPU (Q7BAT)
Q8BAT-SET
Q8BAT connection cable
2
- 15 2.1 System Configuration
2.1.1 System Configuration for Single CPU System
(c) When the slim type main base unit (Q3 SB) is used
1
Memory card
4
Battery for QCPU
(Q8BAT)
* 1: One memory card can be installed.
Select a memory card from SRAM card, Flash card, and ATA card according to the application
and capacity.
With commercial memory cards, the operation is not assured.
* 2: The slim type main base unit does not have an extension cable connector.
The extension base unit cannot be connected and bus connection of GOT is not available.
* 3: As a power supply module, use the slim type power supply module.
The Q series power supply module and the redundant power supply module are not available for
the power supply module.
* 4: When using the Q8BAT-SET for the Universal model QCPU, use the connection cable whose
connector part displays "A".
For details of connector part of a connection cable, refer to Section 7.2.2.
Diagram 2.14 System configuration when Q3 SB is used
Universal model QCPU
Q3 SB slim type main base unit
Slim type power supply module/I/O module/
Intelligent function module
2, 3