Mitsubishi Q01CPU User Manual page 603

12
TROUBLESHOOTING
(6) Drive information
Number Name
Memory card (A) OFF : Unusable
SM600
usable flags ON : Use enabled
Memory card (A) OFF : No protect
SM601
protect flag ON : Protect
OFF : No drive 1
SM602 Drive 1 flag
ON : Drive 1 present
OFF : No drive 2
SM603 Drive 2 flag
ON : Drive 2 present
Memory card (A) in- OFF : Not used
SM604
use flag ON : In use
Memory card (A) OFF : Remove/insert enabled
SM605 remove/insert prohibit ON : Remove/insert
flag
OFF : Remove/insert
Memory card remove/
SM609
insert enable flag
ON : Remove/insert enabled
Memory card B usable OFF : Unusable
SM620
flags ON : Use enabled
OFF : No protect
Drive 3/4 protect flag
ON : Protect
SM621
Memory card B protect OFF : No protect
flag ON : Protect
OFF : No drive 3
SM622 Drive 3 flag
ON : Drive 3 present
OFF : No drive 4
SM623 Drive 4 flag
ON : Drive 4 present
Memory card B in-use
OFF : Not used
ON
flag
SM624
OFF : Not used
Drive 3/4 in-use flag
ON
Memory card B OFF : Remove/insert enabled
SM625 remove/insert prohibit ON : Remove/insert
flag
OFF : File register not used
SM640 File register use
ON : File register in use
Table12.33 Special relay
Meaning
• ON when memory card (A) is ready for use by user
• Goes ON when memory card (A) protect switch is
ON
• Turns ON when the mounted memory card (A) is
RAM
• Turns ON when the mounted memory card (A) is
ROM
• Goes ON when memory card (A) is in use
• Goes ON when memory card (A) cannot be inserted
or removed
prohibited
• Turned ON by user to enable the removal/insertion
of memory card.
• Turned OFF by the system after the memory card is
prohibited
removed.
• This contact can be used only when SM604 and
SM605 are OFF.
• ON when memory card B is ready for use by user
• Always OFF
• Goes ON when memory card B protect switch is ON
• Always ON
• Goes ON when drive 3 (card 2 RAM area) is present
• Always ON
• Goes ON when drive 4 (card 2 ROM area) is present
• Goes ON when memory card B is in use
: In use
• Goes ON when the file within Drive 3 (standard
: In use RAM) or Drive 4 (standard ROM) is used.
• Goes ON when memory card B cannot be inserted or
removed
prohibited
• Goes ON when file register is in use
Explanation
(When Set)
S (Status change)
S (Status change)
S (Status change)
S (Status change)
S (Status change)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Initial)
S (Status change)
S (Status change)
S (Status change)
12.7 Special Relay List
Corres-
Set by ponding Corresponding
ACPU CPU
M9
New
New
QnA
New
Qn(H)
QnPH
New
QnPRH
QnU
New
U New
Qn(H)
QnPH
S/U New
QnPRH
QnU
Q2A(S1)
Q3A
New
Q4A
Q4AR
New QCPU
Q2A(S1)
Q3A
New
Q4A
Q4AR
New QCPU
Q2A(S1)
Q3A
New
Q4A
Q4AR
New QCPU
Q2A(S1)
Q3A
New
Q4A
Q4AR
Q2A(S1)
Q3A
New
Q4A
Q4AR
Qn(H)
QnPH
New
QnPRH
QnU
Q2A(S1)
Q3A
U New
Q4A
Q4AR
New
12
9
10
11
12
- 279