Mitsubishi Q01CPU User Manual page 70

2
SYSTEM CONFIGURATION
Extension cable
2
- 9 2.1 System Configuration
2.1.1 System Configuration for Single CPU System
(d) When the Multiple CPU high speed main base unit (Q3 DB) is used
High Performance model QCPU
Q3 DB multiple CPU high speed
main base unit
Q6 B extension base unit
Q5 B extension base unit
* 1: One memory card can be installed.
Select a memory card from SRAM card, Flash card, and ATA card according to the application
and capacity.
With commercial memory cards, the operation is not assured.
* 2: As a power supply module, use the Q series power supply module.
The slim type power supply module and the redundant power supply module are not available for
the power supply module.
* 3: The Q series power supply module is not required for the Q5 B extension base unit.
Diagram 2.8 System configuration when Q3 DB is used
Battery for QCPU (Q6BAT)
1
Memory card
Battery holder
Q8BAT connection cable
2
Power supply module/I/O module/Intelligent function module
2
3
Q7BAT-SET
Battery for QCPU (Q7BAT)
Q8BAT-SET
Battery for QCPU
(Q8BAT)