10
LOADING AND INSTALLATION
Push simultaneously
Module fixing projection
* 2: If the module has two fixing projections, remove the two module fixing projections on the right and
left of the module bottom from the module fixing holes.
POINT
When the module fixing screw is used, always remove the module by removing
the module fixing screw and then taking the module fixing projection off the
module fixing hole of the base unit.
Attempting to remove the module by force may damage the module fixing
projection.
Diagram 10.26 Q6 RP removal procedure
10.3 Module Installation
10.3.3 Installation and removal of module
9
10
11
12
10
- 25