Chapter11 Maintenance And Inspection - Mitsubishi Q01CPU User Manual

11
MAINTENANCE AND INSPECTION

CHAPTER11 MAINTENANCE AND INSPECTION

Do not touch the terminals while power is on.
Doing so could cause shock.
DANGER
Correctly connect the battery. Also, do not charge, disassemble,
heat, place in fire, short circuit, or solder the battery.
Mishandling of a battery can cause overheating or cracks which
could result in injury and fires.
Switch off all phases of the externally supplied power used in the
system when cleaning the module or retightening the terminal or
module mounting screws.
Conducting these operations when the power is on could result in
electric shock.
Loose terminal screws may cause short circuits or malfunctions.
Failure to mount the module properly will result in short circuit,
malfunction or in the module falling.
9
10
11
12
11
- 1