Mitsubishi Q01CPU User Manual page 129

4
HARDWARE SPECIFICATIONS OF THE CPU MODULE
Item
Interrupt pointer [I]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Data transmission
speed
Communication mode
Specifica
tions of Transmission method
built-in Max. distance between
Ethernet
hub and node
port
Max. 10BASE-T
CPU
number of
100BASE
module
connectab
-TX
*11 le nodes
Number of connections
*12
*11 : The Built-in Ethernet port QCPU is targeted.
*12 : The number indicates the total number of TCP/IP and UDP/IP protocols.
Table4.5 Performance Specifications
Q03UDCPU
Q02UCPU
Q03UDECPU
256 points (I0 to 255)
The constant cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
(0.5 to 1000ms, 0.5ms unit)
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
2048 points (SM0 to 2047) (The number of device points is fixed.)
2048 points (SM0 to 2047) (The number of device points is fixed.)
16 points (FX0 to F) (The number of device points is fixed.)
16 points (FY0 to F) (The number of device points is fixed.)
5 points (FD0 to 4) (The number of device points is fixed.)
Device for accessing the link device directly.
Dedicated to CC-Link IE controller network and MELSECNET/H.
Specified form: J \X , J
J \SW , J
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U \G
----
----
----
----
----
----
---- 16 for MELSOFT connection and MC protocol, 1 for FTP
Universal model QCPU
Q04UDHCPU Q06UDHCPU
Q04UDEHCPU Q06UDEHCPU Q13UDEHCPU Q26UDEHCPU
----
\Y , J \W , J \B
\SB
100/10Mbps
Full-duplex/Half-duplex
Base band
100m (328.08feet.)
Cascade connection: Four stages at maximum
Cascade connection: Two stages at maximum
4.1 Performance Specifications
4.1.5 Universal model QCPU
Q13UDHCPU Q26UDHCPU
,
4
1
2
3
4
5
6
7
8
- 19