Mitsubishi Q01CPU User Manual page 517

Melsec-q series, qcpu
Hide thumbs Also See for Q01CPU:
Table of Contents

Advertisement

12
TROUBLESHOOTING
Error
Code
Error Contents and Cause
(SD0)
In a redundant system, the valid
parameter drive settings (SW2, SW3)
6001
made by the DIP switches are not the
same.
The operational status of the control
system and standby system in the
redundant system is not the same.
(This can be detected from the standby
system of the redundant system.)
6010
The operational status of the control
system and standby system in the
redundant system is not the same.
(This can be detected from the standby
system of the redundant system.)
At power ON/reset, the RUN/STOP
switch settings of the control system
and standby system are not the same in
6020
a redundant system.
(This can be detected from the control
system or standby system of the
redundant system.)
• In a redundant system, the module
configuration differs between the
control system and standby system.
• The network module mode setting
6030
differs between the two systems.
(This can be detected from the control
system or standby system of the
redundant system.)
In a redundant system, the CPU module
model name differs between the control
6035
system and standby system.
(This can be detected from the standby
system of the redundant system.)
*1
The module whose first 5 digits of serial No. is 09012 or later.
Corrective Action
Match the valid parameter drive settings
(SW2, SW3) by the DIP switches of the
control system and standby system.
Synchronise the operation statuses of
the control system and standby system.
Synchronise the operation statuses of
the control system and standby system.
Set the RUN/STOP switches of the
control system and standby system to
the same setting.
• Match the module configurations of
the control system and standby
system.
• In the redundant setting of the
network parameter dialog box, match
the mode setting of System B to that
of System A.
Match the model names of the control
system and standby system.
12.3 Error Code List
12.3.8 Error code list (6000 to 6999)
9
Corresponding
CPU
10
QnPRH
Q4AR
11
12
QnPRH
12
- 193

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents