Mitsubishi Q01CPU User Manual page 575

12
TROUBLESHOOTING
Diagram 12.27 Online module change screen
Diagram 12.28 Online module change screen
12)After mounting the module, click the "Execution" button.
(Table12.17 shows the communication status with the target module for online
module change when the following screen (refer to Diagram 12.27) is
displayed.)
POINT
When the initial settings of the intelligent function module have been made by GX
Configulator, the set data are written to the intelligent function module.
13)Click the "Execution" button to start control.
14)The "Online module change completed" screen appears.
(Table12.18 shows the communication status with the target module for online
module change when the following screen (refer to Diagram 12.28) is
displayed.)
Table12.17 Communication status with the module
Target module, item
Input module refresh
Output module refresh
Input refresh
I/O hybrid module
Output refresh
Input refresh
Output refresh
FROM/TO instruction
Instruction using intelligent
function module device
Intelligent dedicated instruction
Intelligent function
Intelligent automatic refresh
module
Buffer memory batch monitor
Table12.18 Communication status with the module
Target module, item
Input module refresh
Output module refresh
Input refresh
I/O hybrid module
Output refresh
Input refresh
Output refresh
FROM/TO instruction
Instruction using intelligent
Intelligent function
function module device
module
Intelligent dedicated instruction
Intelligent automatic refresh
Buffer memory batch monitor
12.4 Module Change during System Operation
12.4.1 Online module change
9
10
Executed/Not
executed
Not executed
(Data held)
Not executed
Not executed
(Data held)
11
Not executed
Executed
Executed
No processing
No processing
No processing
No processing
12
Executed
Executed/Not
executed
Executed
Executed
Executed
Executed
Executed
Executed
Executed
Executed
Executed
Executed
Executed
12
- 251