Mitsubishi Q01CPU User Manual page 561

12
TROUBLESHOOTING
Error code
Error item
(Hexadecimal)
41E7
H
41E8
H
41E9
H
41EB
H
41EC
H
41ED
H
41EF
H
41F0
H
File-related
41F1 errors
H
41F2
H
41F8
H
41FA
H
41FB
H
41FC
H
41FD
H
41FE
H
41FF
H
12.3.11 Error codes returned to request source during communication with CPU module
Table12.12 Error code
Error details
The format information data of the specified
drive (memory) is abnormal.
The format information data of the specified
drive (memory) is abnormal.
The specified file is being accessed.
The file name is specified in a wrong method.
The file system of the specified drive
(memory) is logically corrupted.
The specified drive (memory) does not have
continuous free space.
(The free space for file is sufficient but the
continuous free space is insufficient.)
Creation of power failure backup for the
specified drive (memory) was unsuccessful.
The power failure backup data of the specified
drive (memory) are corrupted.
The power failure backup for the specified
drive (memory) has a repair command.
Operation cannot be performed since the
specified drive (memory) is Flash ROM.
The identical data is being accessed by the
other peripheral devices.
Program was written beyond the area where
the program can be executed.
Operation is being performed for the file
already specified for the same peripheral
device.
An attempt was made to erase the drive
(memory) being used.
There are no data written to the Flash ROM.
The memory card has not been inserted.
The memory card type differs.
Corrective action
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after some time.
Execute again after checking the file name.
The file information data may have been corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after deleting unnecessary files or
executing programmable controller memory
arrangement.
Execute again after checking whether the memory card
has been installed.
Execute again after checking whether the memory card
has been installed.
Execute again after checking whether the memory card
has been installed.
Execute again after checking the specified drive
(memory).
When performing operation for the Flash ROM, use write
to PLC (Flash ROM).
PLC write to the program memory or transfer to the
backup memory is in execution.
Access the data again after checking that the above-
mentioned function has been completed.
Execute again after reducing either the already written
program or newly written program.
Execute again after the currently performed operation is
completed.
The specified drive (memory) is being used and cannot
be erased.
Write a file by executing write to PLC (Flash ROM).
Insert or re-insert the memory card.
Check the memory card type.
12.3 Error Code List
9
10
11
12
12
- 237