Setting Data To A Register - Fuji Electric micrex-sx SPH User Manual

7-3-8 Setting data to a register

• This function selects a register and writes data in it.
Sample setting of frequency data and pulse count data
Register select
(PC = = > MP1/MP2)
Set value data
(PC = = > MP1/MP2)
Write command
(PC = = > MP1/MP2)
Response to write command
(PC < = = MP1/MP2)
Point of use:
· This module (NP1F-MP1/NP1F-MP2) outputs a response signal to the write command sent from the CPU
module.
Handshaking can be performed between the CPU module and this module by the response to the write
command.
7-3 Functions of Pulse Generation Mode
Target frequency register Command pulse register
Frequency data
"1"
7-13
Pulse count data
"1"
"1" "1"