8-2 Error Indication
) 1
S
X
b
u
- s
e r
a l
e t
d
r e
o r
s r
Sample system configuration
Note: Same for the following cases
or
: SX bus terminating plug
For details, refer to the hardware manual (manual No. FEH201).
Event:
• The following event occurred when the power was turned on.
Cause:
Occurred because there is no terminating plug.
Remedy:
Mount the terminating plug.
Turn the power on again.
For this, terminating plug (NP8B-BP) is
necessary.
8-2
CPU module
ERR
ALM
I/O and positioning
ONL
control module
LED
On
LED
On
LED
Blinking