Table of Contents
Advertisement
2.
Insert the M.2 module into the connector.
3.
Secure the card to the riser screw on the board using the screw shipped with the M.2
module.
Chapter 3 Installing the Devices
Chapter 3
Installing a Wi-Fi Module
The system is also equipped with an M.2
USB signals for wireless communication modules. The system may come with a pre-installed
Intel
®
standards.
To install the M.2 module, follow these steps:
1.
Grasp the module by its edges and align the notch of the M.2 module with the key in the
connector.
2.
Insert the M.2 module into the connector.
3.
Secure the card to the riser screw on the board using the screw shipped with the M.2
module.
M.2 wireless module
M.2 SSD card
14
Type 2230 connector
Dual Band Wireless-AC 8260, which complies with Wi-Fi 802.11ac and Bluetooth 4.2
(E Key). It supports PCIe and
www.dfi.com
Advertisement
Table of Contents
