Installing The So-Dimm Module - DFI ED700-EHL22I Quick Installation Manual

Installing the SO-DIMM Module

Before installing the memory module, please make sure that the following safety cautions are
well-attended.
1. Make sure the PC and all other peripheral devices connected to it has been powered
down.
2. Disconnect all power cords and cables.
3. Locate the SO-DIMM socket on the system board
4. Make sure the notch on memory card is aligned to the key on the socket.
4 5 °
Step 1
Quick Installation Guide | ED700-EHL22I
Retention Notch
Notch
Retention Clip
Key
DDR4 SO-DIMM
Socket Top View
6