DFI OPS100-SH User Manual page 62

Hide thumbs Also See for OPS100-SH:
Table of Contents

Advertisement

4. Enter a password in the space provided under "Intel(R) ME Password", and then press
"Enter". The password must include:
• 8-32 characters
• Strong 7-bit ASCII characters excluding : , and " characters
• At least one digit character (0, 1, ...9)
• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)
• Both lower case and upper case characters
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
MAIN MENU
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Configuration
MEBx Exit
Intel (R) ME Password
Intel(R) ME Password
[↑↓] = Move Highlight
[Enter] = Select Entry
Chapter 8 Intel AMT Settings
Chapter 6
Chapter 8
[Esc]= Exit
62
5. You will be asked to verify the password. Enter the same new password in the space pro-
vided under "Verify Password", and then press "Enter".
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
MAIN MENU
MEBx Login
> Intel (R) ME General Settings
> Intel (R) AMT Configuration
MEBx Exit
Verify Password
Intel(R) ME Password
[↑↓] = Move Highlight
[Enter] = Select Entry
6. Select "Intel(R) ME General Settings" and press "Enter".
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
MAIN MENU
> Intel (R) ME General Settings
> Intel (R) AMT Configuration
MEBx Exit
[↑↓] = Move Highlight
[Enter] = Select Entry
[Esc]= Exit
[Esc]= Exit
www.dfi.com

Advertisement

Table of Contents
loading

Table of Contents