Chapter 2 - Getting Started - DFI OPS100-SH User Manual

Chapter 2 - Getting Started

Preparing the System
Before you start using the system, you need the following items:
• Wireless Antennas (if wireless module is installed)
• AC power adapter
• CD-ROM drive (for installing software/drivers)
Installing Devices
The following are devices that can be installed in the system.
• microSD card
• M.2 SSD card
• M.2 wireless card
• M.2 capture card
Configuring the BIOS
To get you started, you may need to change configurations such as the date, time and the type
of hard disk drive.
1. Power-on the system.
2. After the memory test, the message "Press DEL to run setup" will appear on the screen.
Press the Delete key to enter the BIOS setup utility.
Installing the Operating System
Most operating system software are provided in a CD therefore you need to install a CD-ROM
drive in order to use the CD. Alternatively, you can remotely install an operating system using
Intel AMT.
®
Please refer to your operating system manual for instructions on installing the operating system.
Installing the Drivers
The system package includes a CD disk. The CD includes drivers that must be installed to pro-
vide the best system performance. Refer to the Supported Software chapter for instructions on
installing the drivers.
Chapter 2 Getting Started
Chapter 2
10
www.dfi.com