Table of Contents
Advertisement
Network Device List
The "Device Manager" screen is displayed. And if the "Network Stack" or the "PXE Boot
to LAN" option is enabled from the "Boot" menu, the "Network Device List" should
be shown in the "Device list". Select "Network Device List" to view all of the detected
network devices. For each network device, you can select to view and configure its
settings. In addition, you can select either the IPv4 or IPv6 network settings for UEFI
network configurations.
Chapter 6 BIOS Setup
Chapter 6
Port Configuration Menu
This screen shows hardware information for the Ethernet controllers and configures
their operation.
Blink LEDs
Enter the duration (seconds) for the Ethernet's ACT LED to blink to indicate its presence.
NIC Configuration
This screen configures the Ethernet controller. Select the link speed from the following
options: Auto Negotiated, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps Full.
42
www.dfi.com
Advertisement
Table of Contents
