Table of Contents
Advertisement
Boot display
Prioritize device combination for display during system boot. Note that this option will be
shown only if the "Boot type" is set to "Dual" or "Legacy".
HDMI-in
Enable the HDMI-in option to let the HDMI signal pass through the system by connect-
ing an HDMI-compliant source device to the front HDMI-in port. The default is disabled.
Chapter 6 BIOS Setup
Chapter 6
Audio Configuration
This section configures the audio settings.
HD Audio
Control the detection of the high-definition audio devices.
Disabled
High-definition audio devices will be unconditionally disabled.
Enabled
High-definition audio devices will be unconditionally enabled.
Auto
High-definition audio devices will be enabled if present and disabled otherwise.
37
www.dfi.com
Advertisement
Table of Contents
