Table of Contents
Advertisement
Installing the DIMM module
1. The DIMM socket is located on the system board. Note the key on the socket. The key en-
sures that the memory module can be plugged into the socket in one direction only.
Chapter 3 Installing the Device
Chapter 3
Installing the CPU
1. Make sure the PC and all other peripheral devices connected to it has been powered down.
2. Disconnect all power cords and cables.
3. Locate the LGA 1150 CPU socket on the system board.
Important:
1. Before you proceed, make sure (1) the LGA 1150 socket comes with a protective
cap, (2) the cap is not damaged and (3) the socket's contact pins are not bent. If
the cap is missing or the cap and/or contact pins are damaged, contact your dealer
immediately.
2. Make sure to keep the protective cap. RMA requests will be accepted and pro-
cessed only if the LGA 1150 socket comes with the protective cap.
DIMM socket
13
Protective cap
www.dfi.com
Advertisement
Table of Contents
