Boot - DFI OPS100-SH User Manual

Boot

This section configures boot options.
Numlock
Select the power-on state for the Num Lock key.
Boot Type
Select the boot type. The options are Dual Boot, Legacy Boot and UEFI Boot Type.
Network Stack
This option is shown only when the boot type is set to Dual or UEFI.
Enable or disable UEFI network stack. It supports the operation of these functions
or software: Windows 8 BitLocker Network Unlock, UEFI IPv4/IPv6 PXE and legacy
PXE option ROM.
If this function is enabled, you can then go to "Advanced">"Device Manager" to
configure network settings for network connection under the UEFI environment.
PXE Boot to LAN
Enable or disable Preboot eXecution Environment (PXE) boot to LAN. In the UEFI
or Dual boot mode, this function can only be enabled if the Network Stack support
is enabled.
USB Boot
Enable or disable booting to USB boot devices.
Chapter 6 BIOS Setup
Chapter 6
Boot Device Priority
This section configures legacy or EFI boot order or both depending on the "Boot
Type" selected.
EFI Boot Menu
Use + and - keys to arrange the priority of the boot devices in the list.
Legacy Boot Menu
Normal
For this option, determine the boot order for the devices within each category. Use the
+ and - key to arrange the priority of the boot devices in the list. The first device in the
list has the highest boot priority.
Advance
For this option, determine the boot order for all bootable devices. Use + and - keys to
arrange the priority of the detected boot devices in the list. The first device in the list
has the highest boot priority.
48
www.dfi.com